1 confguration ? connector 1: n male ? connector 2: n female ? cable type: pe-vna-r features ? designed for use as vna test port extenders ? excellent vswr and insertion loss ? stainless steel armoring provides crush resistance ? non conductive protective outer sleeve ? t orsion resistant connector heads ? rugged connector interface with machined strain relief collar ? excellent amplitude and phase stability with fexure ? each serialized assembly comes with test data ? in stock and ready to ship applications ? v ector network analyzer test port extenders ? precise bench top testing ? lab and production testing . description pasternack ruggedized vna test cables are designed to provide customers with repeatable accurate vna measurements. these test cables have excellent electrical properties including low insertion loss, low vswr and phase stability of +/- 2 with fexure. torsion resistant connector heads are directly attached to stainless steel conduit style armoring providing a rug - ged design for up to 5,000 mattings cycles with proper care. the cable armoring enhances amplitude and phase stability by preventing stress due to over bending while maintaining the fexibility required for testing in a lab environment. when used with the appropriate calibration kit these test cables effectively extend the test port of the vna allowing for accurate measure - ments of devices that cannot be directly connected to a network analyzer test port. electrical specifcations description minimum t ypical maximum units frequency range dc 18 ghz vswr 1.25:1 velocity of propagation 70 % rf shielding 90 db capacitance 29.4 [96.46] pf/ft [pf/m] phase stability with flexure 2 degrees . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n female cable 48 length using ruggedized vna test coax, rohs pe- 3vna1804-48 PE3VNA1804-48 rev 1.0 vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs rf cable assemblies - PE3VNA1804-48
2 specifcations by frequency description f1 f2 f3 f4 f5 units frequency 6 12 18 ghz insertion loss (max.) 1.54 2.34 3.03 db vswr (max.) 1.25:1 1.25:1 1.25:1 power handling (max.) 88 watts . mechanical specifcations cable assembly length 48 in [121.92 cm] . one time minimum bend radius 4 in [101.6 mm] cable cable type pe-vna-r impedance 50 ohms inner conductor type solid inner conductor material and plating copper , silver dielectric type ptfe number of shields 3 shield layer 1 silver plated copper braid shield layer 2 silver plated copper tape shield layer 3 silver plated copper braid jacket material pet jacket diameter 0.43 in [10.92 mm] connectors description connector 1 connector 2 type n male n female impedance 50 ohms 50 ohms connection method standard standard contact material and plating beryllium copper , gold beryllium copper , gold dielectric type ptfe ptfe coupling nut material and plating passivated stainless steel body material and plating passivated stainless steel passivated stainless steel . mechanical specifcation notes: crush resistance: 1,050 lbs. jacket material is a pet weave over a spiral stainless steel sheath PE3VNA1804-48 rev 1.0 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n female cable 48 length using ruggedized vna test coax, rohs pe- 3vna1804-48 vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs rf cable assemblies - PE3VNA1804-48
3 environmental specifcations temperature operating range +125 deg c compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: ? values at 25c, sea level. typical performance data PE3VNA1804-48 rev 1.0 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n female cable 48 length using ruggedized vna test coax, rohs pe- 3vna1804-48 vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs rf cable assemblies - PE3VNA1804-48
4 how to order part number confguration: pe3vna1804 - xx uu | | | unit of measure: | | cm = centimeters | | = inches | length | base number example: pe3vna1804-12 = 12 inches long cable pe3vna1804-100cm = 100 cm long cable vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: n male to n female cable 48 length using ruggedized vna test coax, rohs PE3VNA1804-48 url: http://www.pasternack.com/n-male-n-female-vna-cable-cable-assembly-PE3VNA1804-48-p.aspx PE3VNA1804-48 rev 1.0 vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs rf cable assemblies - PE3VNA1804-48
5 PE3VNA1804-48 rev 1.0 vna ruggedized test cable n male to n female 18ghz 48 inch length, rohs PE3VNA1804-48 cad drawing
|
